Block diagram & Microcontroller Functions

>  CPU

CPU is the brain of a microcontroller .CPU is responsible for fetching the instruction, decodes it, then finally executed. CPU connects every part of a microcontroller into a single system. The primary function of CPU is fetching and decoding instructions. Instruction fetched from program memory must be decoded by the CPU.

>  Memory

The function of memory in a microcontroller is same as microprocessor. It is used to store data and program. A microcontroller usually has a certain amount of RAM and ROM (EEPROM, EPROM, etc) or flash memories for storing program source codes.

>  Parallel input/output ports

Parallel input/output ports are mainly used to drive/interface various devices such as LCD’S, LED’S, printers, memories, etc to a microcontroller.

>  Serial ports

Serial ports provide various serial interfaces between microcontroller and other peripherals like parallel ports.

>  Timers/counters

This is the one of the useful function of a microcontroller. A microcontroller may have more than one timer and counters. The timers and counters provide all timing and counting functions inside the microcontroller. The major operations of this section are perform clock functions, modulations, pulse generations, frequency measuring, making oscillations, etc. This also can be used for counting external pulses.

>  Analog to Digital Converter (ADC)

ADC converters are used for converting the analog signal to digital form. The input signal in this converter should be in analog form (e.g. sensor output) and the output from this unit is in digital form. The digital output can be use for various digital applications (e.g. measurement devices).

>  Digital to Analog Converter (DAC)

DAC perform reversal operation of ADC conversion.DAC convert the digital signal into analog format. It usually used for controlling analog devices like DC motors, various drives, etc.

>  Interrupt control

The interrupt control used for providing interrupt (delay) for a working program .The interrupt may be external (activated by using interrupt pin) or internal (by using interrupt instruction during programming).

>  Special functioning block

Some microcontrollers used only for some special applications (e.g. space systems and robotics) these controllers containing additional ports to perform such special operations. This considered as special functioning block.